CCIE - Routing & Switching Class
"Until You Pass! Risk-Free Guarantee"
|
NO. |
COURSE |
INSTRUTOR |
THEORY CLASS |
LAB TIME |
VALID |
PRICE |
|
101 |
CCIE-R/S |
David |
270 Days * 3 hours |
270 Days * 6 hours |
270 Days |
$9888 |
|
102 |
CCIE-SP |
WINDY |
270 Days * 3 hours |
270 Days * 6 hours |
270 Days |
$9888 |
|
103 |
CCIE-SECURITY |
ALBERT |
270 Days * 3 hours |
270 Days * 6 hours |
270 Days |
$13,888 |
This training class is led by a Quad CCIE (R&S, Security, SP, and Voice), former Cisco advanced services technical leader, who has more than 10 years interneworking experience. The following are the contents that will be covered in the 9 month intensive training.
Course Outline
1. Implementing Spanning Tree Protocol (STP)
- 802.1d
- 802.1w
- 802.1s
- loop guard
- root guard
- Bridge Protocol Data Unit (BPDU) guard
- storm control
- unicast flooding
- port roles, failure propagation and loop guard operation
2. Implementing VLAN and VLAN trunking Protocol (VTP)
3. Implementing trunk and trunk protocols, EtherChannel and load-balance
4. Implement Ethernet Technologies
- speed and Duplex
- ethernet, fast ethernet, and gigabit Ethernet
- PPP over Ethernet (PPPoE)
5. Implementing switched Port Analyzer (SPAN) and Remote Switched Port Analyzer (RSPAN) and flow control
6. Implementing Frame-relay
- local management interface (LMI)
- traffic shaping
- full mesh
- hub and spoke
- discard eligible (DE)
7. Implementing High-level Data Link Control (HDLC) and PPP
8. Implementing IPv4
- Implementing ipv4 addressing, subnetting, and variable length subnet masking (VLSM)
- Implementing ipv4 tunneling and generic routing encapsulation (GRE)
- Implementing RIP version 2 (RIPV2)
- implementing ipv4 OSPF
- standard OSPF areas
- stub area
- totally stubby area
- not-so-stubby area (NSSA)
- totally NSSA
- link state advertisement (LSA) types
- adjacency on a point-to-point and on multi-access network
- OSPF graceful restart
- Implementing IPv4 Enhanced Interior Gateway Protocol (EIGRP)
- Best path
- Loop-free paths
- EIGRP operations when alternate loop-free paths are available, and when they are not available
- Manual summarization and auto-summarization
- EIGRP stubs
- Implementing IPv4 Border Gateway Protocol (BGP)
- Next hop
- Peering
- Internal border gateway protocol (iBGP) and External Border Gateway Protocol (eBGP)
- Implementing policying routing
- Implementing performance routing (PfR) and Cisco Optimized Edge Routing (OER)
- Implementing filtering, route redistribution, summarization, synchronization, attributes and other advanced features
9. Implementing IPv6
- Implementing IP version 6 (IPv6) addressing and different addressing types
- Implementing Ipv6 neighbour discovery
- Implementing basic Ipv6 functionality protocols
- Implementing tunnelling techniques
- Implementing OSPF version 3 (OSPFv3)
- Implementing EIGRP version 6 (EIGRPv6)
- Implementing filtering and route redistribution
10. Implement MPLS Layer 3 VPNs
- Implement Multiprotocol Label Switching (MPLS)
- Implement layer 3 virtual private network (VPNs) on provider edge (PE), provider(P) , and customer edge (CE) routers
- Implement virtual routing and forwarding (VRF) and multi-vrf customer edge (VRF-Lite)
11. Implement IP multicast
- Implement protocol independent multicast (PIM ) sparse mode
- Implement multicast source discovery (MSDP)
- Implement interdomain multicast routing
- Implement PIM auto-Rendezvous point (Auto-RP), unicast rendezvous point (RP) and bootstrap router (BSR)
- Implement multicast tools, features and source specific multicast
- Implement ipv6 multicast, PIM and related multicast protocols, such as multicast listener discovery (MLD)
12. Implement Network Security
- Implement access-lists
- Implement zone base firewall
- Implement unicast reverse path forwarding (uRPF)
- Implement Ip source guard
- Implement authentication, authrorization, and accounting (AAA) (configured the AAA server is not required, only the client-side (IOS) is configured)
- Implement control plane policing (CoPP)
- Implement Cisco IOS firewall
- Implement Secure Shell (SSH0
- Implement Cisco IOS intrustion prevention system (IPS)
- Implement 802.1X
- Implement NAT
- Implement routing protocols authentication
- Implement device access control
- Implement security features
13. Implement Network services
- Implement hot standby router protocol (HSRP)
- Implement gateway load balancing protocol (GLBP)
- Implement virtual router redundancy protocol (VRRP)
- Implement network time protocol (NTP)
- Implement DHCP
- Implement web cache communication protocol (WCCP)
14. Implement Quality of service (QoS)
- Implement Modular QoS CLI (MQC)
- Network based application recognization (NBAR)
- Class-based weighted fair queuing (CBWFQ), Modified deficit round robin (MDRR), and low latency queuing (LLQ)
- Classification
- Policing
- Shaping
- Marking
- Weighted random early detection (WRED) and random early detection (RED)
- Compression
- Implement link fragmentation and interleaving (LFI) for frame-relay
- Implement generic traffic shaping
- Implement resource reservation protocol (RSVP)
- Implement Cisco Auto QoS
15. Troubleshoot a network
- Troubleshoot complex layer 2 network issues
- Troubleshoot complex layer 3 network issues
- Troubleshoot a network in response to application problems
- Troubleshoot a network services
- Troubleshoot network security
16. Optimize a network
- Implement syslog and local logging
- Implement IP services Level agreement SLA
- Implement Netflow
- Implement SPAN, RSPAN, and router IP traffic export (RITE)
- Implement simple network management protocol (SNMP)
- Implement Cisco IOS Embedded Event Manager (EEM)
- Implement remote monitoring (RMON)
- Implement FTP
- Implement TFTP
- Implement TFTP on a router
- Implement secure copy protocol (SCP)
- Implement Telnet
Copyright ©2007 WOLF Network Technology Inc. All rights reserved. http://www.labwolf.com |
|
LABWOLF BBS
